When we choose full-fledged modeling as an option, we should know that everyone can’t benefit from it. Although it may be tempting to modernize every component of a vintage space, such improvements may not be feasible in terms of time, cash, or even patience.
That is why paint is frequently used to save the day. Almost everything may be revived with a single coat of paint, including popcorn ceilings.
What Exactly Are Popcorn Ceiling?
Popcorn ceilings are also known as ceilings with textures on them. Moreover, the stucco ceilings or cottage cheese ceilings were a fashionable mid-century alternative to troweled plaster.
When wet, the texture was sprayed onto the ceilings, and when dried, it masked any defects, gave some fire protection, and even reduced sound.
Popcorn ceilings become bland, worn, and old after a while. Trying to remove the popcorn textured coating is untidy, but repainting the popcorn ceiling is a low-cost and mess-free approach to restore the ceiling’s glitter and freshness.
We will also learn how to paint your ceiling at home.
What Sort of Quality and Type of Paint to Use?
The best sort of paint recommended for popcorn ceilings is interior acrylic-latex paint. Because it eliminates light bounce, the standard finish for ceilings is flat or matte.
Popcorn texture ceilings need a greater paint compared to flat ceilings. A gallon of ceilings paint covers 400 to 500 sq ft of the flat ceiling; twice the amount of paint for popcorn ceilings.
Steps to Follow While Painting the Ceiling:
STEP 1:
Because the pattern of a popcorn ceiling is certain to generate a lot of spatter when you spread on paint, prepare your space properly.
Tape plastic sheeting to the walls and drop cloths to the flooring. Also, use plastic and painter’s tape to cover and disguise any ceiling fixtures.
STEP 2:
Prepare the ceiling edges to obtain a clean edge in which the ceilings meet the wall. Popcorn ceiling removal service Denver CO has experts to do this work for you, but it is essential to understand how crucial the task is.
Put on a mask to prevent dust and eye protection. Using a flathead screwdriver, gently scrape roughly 1/4 inch of the popcorn surface away from the ceiling all along the edges.
STEP 3:
A feather or microfiber duster is preferred for use or the soft bristles dusting brush attachment on your vacuum. To remove dust from all nooks and crevices to not smear the paint on the popcorn ceiling.
STEP 4:
Bring out the paintbrushes! Popcorn and other textured surfaces take more paint to obtain complete coverage, so plan on using twice as much as you would on a smooth ceiling.
Use an angled brush, cut in along the border of the ceiling.
When wet, the rough aggregate likes to rip off, so don’t overwork any area. Apply paint carefully and move on. If you don’t obtain complete coverage around one end of the ceiling, plan on doing a second coat.
STEP 5:
Use a long-napped roller cover to load enough paint in one sweep to avoid bending to refill your roller more than required while painting popcorn ceilings. Instead of a roller pan, purchase a bucket of 5 gallons with a screen or grid.
That’s what professionals use to guarantee the roller is adequately filled with paint. Load the roller completely and apply it to the ceiling in only one direction. Make only one pass.
STEP 6:
Let the first coat dry as directed by the manufacturer, and afterward, roll a second coat in one pass only in a perpendicular direction to the first.
This double coating will provide the most even and consistent coating of the whole ceiling. Maximum color refresh with the least amount of overhead.
Safety Consideration to Notice While Painting Your Ceilings:
Asbestos may be present in some popcorn ceilings. Before 1978, before federal law prohibited its use, asbestos was used in ceiling texturing for its heat resistance.
Read more here about how the asbestos fibers contributed to the material’s strength. Asbestos1 has been linked to lung disease, mesothelioma, and asbestosis in studies. Asbestos may be present in the drywall in older homes.
Final Verdict:
Asbestos fibers may be discharged into the air if the asbestos-containing object is chopped, shattered, drilled, sawn, or sanded. A new coat will quickly give the area a lighter, brighter appearance that will help to open up the space.
Though not a particularly difficult undertaking for the do-it-yourselfer, you can create a popcorn texture that necessitates the use of specific materials and methods.
